From Matijs.van.Zuijlen at xs4all.nl  Sun Jun  3 04:43:48 2007
From: Matijs.van.Zuijlen at xs4all.nl (Matijs van Zuijlen)
Date: Sun, 3 Jun 2007 10:43:48 +0200
Subject: [typo] Can't check out whole typo subversion tree
In-Reply-To: <B3B7DF07-8C05-4332-AF1F-9F2980A8E336@7el.net>
References: <20070526130157.GA24898@matijs.net>
	<B3B7DF07-8C05-4332-AF1F-9F2980A8E336@7el.net>
Message-ID: <20070603084348.GB4319@matijs.net>

On Sat, May 26, 2007 at 03:24:45PM +0200, Frederic de Villamil wrote:
> The answer is http://svn.typosphere.org/typo/trunk

That's the trunk, not the full repository.

-- 
Matijs van Zuijlen					http://www.matijs.net/
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 189 bytes
Desc: Digital signature
Url : http://rubyforge.org/pipermail/typo-list/attachments/20070603/9068265b/attachment.bin 

From mattrose at folkwolf.net  Sun Jun  3 20:11:15 2007
From: mattrose at folkwolf.net (Matt Rose)
Date: Sun, 3 Jun 2007 20:11:15 -0400
Subject: [typo] Can't check out whole typo subversion tree
In-Reply-To: <20070603084348.GB4319@matijs.net>
References: <20070526130157.GA24898@matijs.net>
	<B3B7DF07-8C05-4332-AF1F-9F2980A8E336@7el.net>
	<20070603084348.GB4319@matijs.net>
Message-ID: <29A8B6E1-3152-4A8E-9D55-026A9BADBA1F@folkwolf.net>


That's the trunk version of the full repo.  SVN uses different  
directories to represent branches.  If you want the old 4.0 branch,  
you would check out

http://svn.typosphere.org/typo/branches/branch_4_0_x/

Matt



On 3-Jun-07, at 4:43 AM, Matijs van Zuijlen wrote:

> On Sat, May 26, 2007 at 03:24:45PM +0200, Frederic de Villamil wrote:
>> The answer is http://svn.typosphere.org/typo/trunk
>
> That's the trunk, not the full repository.
>
> -- 
> Matijs van Zuijlen					http://www.matijs.net/
> _______________________________________________
> Typo-list mailing list
> Typo-list at rubyforge.org
> http://rubyforge.org/mailman/listinfo/typo-list


From eamonford at mac.com  Tue Jun  5 15:46:48 2007
From: eamonford at mac.com (Eamon Ford)
Date: Tue, 5 Jun 2007 12:46:48 -0700
Subject: [typo] (no subject)
Message-ID: <FB675D85-0B6B-4301-9CA2-C081A78935D8@mac.com>

Hi all,
Whenever I adjust my Typo settings, post a new entry, or post a  
comment, it takes Typo about 1 minute to load, the next time I load a  
page. Then after that first time, it works fine until the next time  
something is adjusted. Does anyone know what might be wrong here?

Thanks in advance.

From pdcawley at bofh.org.uk  Wed Jun  6 04:18:36 2007
From: pdcawley at bofh.org.uk (Piers Cawley)
Date: Wed, 6 Jun 2007 09:18:36 +0100
Subject: [typo] (no subject)
In-Reply-To: <FB675D85-0B6B-4301-9CA2-C081A78935D8@mac.com>
References: <FB675D85-0B6B-4301-9CA2-C081A78935D8@mac.com>
Message-ID: <897e96cc0706060118l7b1ad187h4d10f57c46641037@mail.gmail.com>

On 05/06/07, Eamon Ford <eamonford at mac.com> wrote:
> Hi all,
> Whenever I adjust my Typo settings, post a new entry, or post a
> comment, it takes Typo about 1 minute to load, the next time I load a
> page. Then after that first time, it works fine until the next time
> something is adjusted. Does anyone know what might be wrong here?

What version of typo are you using?

Tangentially, it would be really handy if we had an
/admin/about_this_typo link somewhere which would give us a nice
potted description of the typo installation and its environment.

I suppose once we have that, it's but a small step to an
admin/report_issue page.

Patches welcome.

From eamonford at mac.com  Wed Jun  6 10:18:08 2007
From: eamonford at mac.com (Eamon Ford)
Date: Wed, 6 Jun 2007 07:18:08 -0700
Subject: [typo] Typo being slow after new posts
In-Reply-To: <897e96cc0706060118l7b1ad187h4d10f57c46641037@mail.gmail.com>
References: <FB675D85-0B6B-4301-9CA2-C081A78935D8@mac.com>
	<897e96cc0706060118l7b1ad187h4d10f57c46641037@mail.gmail.com>
Message-ID: <D60716EB-9E45-4FCE-BAE2-0529FB634C8E@mac.com>


On Jun 6, 2007, at 1:18 AM, Piers Cawley wrote:

> On 05/06/07, Eamon Ford <eamonford at mac.com> wrote:
>> Hi all,
>> Whenever I adjust my Typo settings, post a new entry, or post a
>> comment, it takes Typo about 1 minute to load, the next time I load a
>> page. Then after that first time, it works fine until the next time
>> something is adjusted. Does anyone know what might be wrong here?
>
> What version of typo are you using?
>
Sorry, forgot to mention that: I'm using Typo 4.1.1.
> Tangentially, it would be really handy if we had an
> /admin/about_this_typo link somewhere which would give us a nice
> potted description of the typo installation and its environment.

How would I go about doing that? Does Typo have a page that shows all  
the installation info, or should I make it myself? Sorry, I'm new to  
Typo, so I don't know the ins and outs.

(Also: I changed the title of this thread because I forgot to add one  
before. Sorry.)

> I suppose once we have that, it's but a small step to an
> admin/report_issue page.
>
> Patches welcome.
> _______________________________________________
> Typo-list mailing list
> Typo-list at rubyforge.org
> http://rubyforge.org/mailman/listinfo/typo-list


From jeroen at supercool.nl  Wed Jun  6 11:15:28 2007
From: jeroen at supercool.nl (Jeroen Houben)
Date: Wed, 06 Jun 2007 17:15:28 +0200
Subject: [typo] drag drop admin doesn't work
Message-ID: <4666CF90.2090300@supercool.nl>

Hi,

I just installed typo. I can remove items from the sidebar but dragging 
stuff onto the right doesn't work. The progress indicator keeps 
spinning, but nothing happens and this error is thrown in javascript:

Sortable.options(oldParentNode) has no properties
// this function Sortable.options(oldParentNode).onChange(element);

This happens on osx firefox 2.0.4, camino and safari

Any ideas?

Jeroen

From cpatti at gmail.com  Wed Jun  6 12:56:35 2007
From: cpatti at gmail.com (Chris Patti)
Date: Wed, 6 Jun 2007 12:56:35 -0400
Subject: [typo] drag drop admin doesn't work
In-Reply-To: <4666CF90.2090300@supercool.nl>
References: <4666CF90.2090300@supercool.nl>
Message-ID: <7b528f860706060956k65620f21g6219ac62535c2ed5@mail.gmail.com>

On 6/6/07, Jeroen Houben <jeroen at supercool.nl> wrote:
> Hi,
>
> I just installed typo. I can remove items from the sidebar but dragging
> stuff onto the right doesn't work. The progress indicator keeps
> spinning, but nothing happens and this error is thrown in javascript:
>
> Sortable.options(oldParentNode) has no properties
> // this function Sortable.options(oldParentNode).onChange(element);
>
> This happens on osx firefox 2.0.4, camino and safari
>
> Any ideas?
>
> Jeroen

Which version of Typo did you install? Was it from a gem or Subversion?

I've seen issues where the sidebar drag will appear to work, but the
result won't show up in the rendered blog page - this has usually been
due to some kind of error with the sidebar - either malformed HTML in
the static sidebar, incorrect auth or a bug in the sidebar's code for
others.

I've not seen the javascript error though.

-Chris

-- 
 Chris Patti --- Y!: feoh -- AIM: chrisfeohpatti --- E-Mail:  cpatti at gmail.com
"The greatest dangers to liberty lurk in insidious encroachment by men of
  zeal,well-meaning but without understanding."-- Justice Louis O. Brandeis
 (Olmstead vs. United States)

From jeroen at supercool.nl  Wed Jun  6 15:35:06 2007
From: jeroen at supercool.nl (Jeroen Houben)
Date: Wed, 06 Jun 2007 21:35:06 +0200
Subject: [typo] drag drop admin doesn't work
In-Reply-To: <7b528f860706060956k65620f21g6219ac62535c2ed5@mail.gmail.com>
References: <4666CF90.2090300@supercool.nl>
	<7b528f860706060956k65620f21g6219ac62535c2ed5@mail.gmail.com>
Message-ID: <46670C6A.8060200@supercool.nl>

Chris Patti wrote:
> On 6/6/07, Jeroen Houben <jeroen at supercool.nl> wrote:
>> Hi,
>>
>> I just installed typo. I can remove items from the sidebar but dragging
>> stuff onto the right doesn't work. The progress indicator keeps
>> spinning, but nothing happens and this error is thrown in javascript:
>>
>> Sortable.options(oldParentNode) has no properties
>> // this function Sortable.options(oldParentNode).onChange(element);
>>
>> This happens on osx firefox 2.0.4, camino and safari
>>
>> Any ideas?
>>
>> Jeroen
> 
> Which version of Typo did you install? Was it from a gem or Subversion?
> 
> I've seen issues where the sidebar drag will appear to work, but the
> result won't show up in the rendered blog page - this has usually been
> due to some kind of error with the sidebar - either malformed HTML in
> the static sidebar, incorrect auth or a bug in the sidebar's code for
> others.
> 
> I've not seen the javascript error though.

I installed the latest stable version locally from the gem. Made some 
changes (added a theme) checked the whole thing into SVN and deployed to 
a test server.

I dropped the database and did a rake db:migrate to make sure I started 
from scratch again. That should have cleared out any malformed HTML that 
may have been stored right? Maybe some HTML was saved on disk and is 
still malformed. I'm getting the same error on my local installation now 
too. It initially seems to work, but after dragging 2 or 3 items it's 
broken again. They whole drag n drop seems a bit buggy and unnecessarily 
complex IMHO. It could just be something I did, just can't work out what 
that might be, it's pretty much a fresh install.


Jeroen

From eamonford at mac.com  Wed Jun  6 15:43:40 2007
From: eamonford at mac.com (Eamon Ford)
Date: Wed, 6 Jun 2007 12:43:40 -0700
Subject: [typo] drag drop admin doesn't work
In-Reply-To: <7b528f860706060956k65620f21g6219ac62535c2ed5@mail.gmail.com>
References: <4666CF90.2090300@supercool.nl>
	<7b528f860706060956k65620f21g6219ac62535c2ed5@mail.gmail.com>
Message-ID: <B55869C2-E08C-44B9-B694-B6200F7A14ED@mac.com>

I have this problem too; I drag an item onto the sidebar, and it  
works fine the first time, but then if I drag another item on, the  
progress indicator just keeps spinning. The only way to get it to  
work again (for me) is to refresh the page.
I had this problem in Typo 4.0.3, then it went away in 4.1, but now  
it came back 4.1.1 (which is what I'm using now).


On Jun 6, 2007, at 9:56 AM, Chris Patti wrote:

> On 6/6/07, Jeroen Houben <jeroen at supercool.nl> wrote:
>> Hi,
>>
>> I just installed typo. I can remove items from the sidebar but  
>> dragging
>> stuff onto the right doesn't work. The progress indicator keeps
>> spinning, but nothing happens and this error is thrown in javascript:
>>
>> Sortable.options(oldParentNode) has no properties
>> // this function Sortable.options(oldParentNode).onChange(element);
>>
>> This happens on osx firefox 2.0.4, camino and safari
>>
>> Any ideas?
>>
>> Jeroen
>
> Which version of Typo did you install? Was it from a gem or  
> Subversion?
>
> I've seen issues where the sidebar drag will appear to work, but the
> result won't show up in the rendered blog page - this has usually been
> due to some kind of error with the sidebar - either malformed HTML in
> the static sidebar, incorrect auth or a bug in the sidebar's code for
> others.
>
> I've not seen the javascript error though.
>
> -Chris
>
> -- 
>  Chris Patti --- Y!: feoh -- AIM: chrisfeohpatti --- E-Mail:   
> cpatti at gmail.com
> "The greatest dangers to liberty lurk in insidious encroachment by  
> men of
>   zeal,well-meaning but without understanding."-- Justice Louis O.  
> Brandeis
>  (Olmstead vs. United States)
> _______________________________________________
> Typo-list mailing list
> Typo-list at rubyforge.org
> http://rubyforge.org/mailman/listinfo/typo-list


From cpatti at gmail.com  Wed Jun  6 15:48:59 2007
From: cpatti at gmail.com (Chris Patti)
Date: Wed, 6 Jun 2007 15:48:59 -0400
Subject: [typo] drag drop admin doesn't work
In-Reply-To: <46670C6A.8060200@supercool.nl>
References: <4666CF90.2090300@supercool.nl>
	<7b528f860706060956k65620f21g6219ac62535c2ed5@mail.gmail.com>
	<46670C6A.8060200@supercool.nl>
Message-ID: <7b528f860706061248k75c16888g8e73b9b4be829c2e@mail.gmail.com>

On 6/6/07, Jeroen Houben <jeroen at supercool.nl> wrote:
> Chris Patti wrote:
> >
> > Which version of Typo did you install? Was it from a gem or Subversion?
> >
> > I've seen issues where the sidebar drag will appear to work, but the
> > result won't show up in the rendered blog page - this has usually been
> > due to some kind of error with the sidebar - either malformed HTML in
> > the static sidebar, incorrect auth or a bug in the sidebar's code for
> > others.
> >
> > I've not seen the javascript error though.
>
> I installed the latest stable version locally from the gem. Made some
> changes (added a theme) checked the whole thing into SVN and deployed to
> a test server.
>
> I dropped the database and did a rake db:migrate to make sure I started
> from scratch again. That should have cleared out any malformed HTML that
> may have been stored right? Maybe some HTML was saved on disk and is
> still malformed. I'm getting the same error on my local installation now
> too. It initially seems to work, but after dragging 2 or 3 items it's
> broken again. They whole drag n drop seems a bit buggy and unnecessarily
> complex IMHO. It could just be something I did, just can't work out what
> that might be, it's pretty much a fresh install.
>
>
> Jeroen

You might try running typo sweep-cache on the blog.  That helped clear
up some bogons for me.

I'm still struggling with where my LiveJournal crossposter code should
go.  Guessing I should just give up and leave it alone since it works
:)

-Chris
-- 
 Chris Patti --- Y!: feoh -- AIM: chrisfeohpatti --- E-Mail:  cpatti at gmail.com
"The greatest dangers to liberty lurk in insidious encroachment by men of
  zeal,well-meaning but without understanding."-- Justice Louis O. Brandeis
 (Olmstead vs. United States)

From stefan.backor at gmail.com  Wed Jun  6 15:59:46 2007
From: stefan.backor at gmail.com (Stefan Backor)
Date: Wed, 6 Jun 2007 21:59:46 +0200
Subject: [typo] drag drop admin doesn't work
In-Reply-To: <B55869C2-E08C-44B9-B694-B6200F7A14ED@mac.com>
References: <4666CF90.2090300@supercool.nl>
	<7b528f860706060956k65620f21g6219ac62535c2ed5@mail.gmail.com>
	<B55869C2-E08C-44B9-B694-B6200F7A14ED@mac.com>
Message-ID: <d4c7649a0706061259j7ed1ca2bv2f12c1841424457d@mail.gmail.com>

Guys, try switch environment. use production instead development.
for me it worked.



On 6/6/07, Eamon Ford <eamonford at mac.com> wrote:
>
> I have this problem too; I drag an item onto the sidebar, and it
> works fine the first time, but then if I drag another item on, the
> progress indicator just keeps spinning. The only way to get it to
> work again (for me) is to refresh the page.
> I had this problem in Typo 4.0.3, then it went away in 4.1, but now
> it came back 4.1.1 (which is what I'm using now).
>
>
> On Jun 6, 2007, at 9:56 AM, Chris Patti wrote:
>
> > On 6/6/07, Jeroen Houben <jeroen at supercool.nl> wrote:
> >> Hi,
> >>
> >> I just installed typo. I can remove items from the sidebar but
> >> dragging
> >> stuff onto the right doesn't work. The progress indicator keeps
> >> spinning, but nothing happens and this error is thrown in javascript:
> >>
> >> Sortable.options(oldParentNode) has no properties
> >> // this function Sortable.options(oldParentNode).onChange(element);
> >>
> >> This happens on osx firefox 2.0.4, camino and safari
> >>
> >> Any ideas?
> >>
> >> Jeroen
> >
> > Which version of Typo did you install? Was it from a gem or
> > Subversion?
> >
> > I've seen issues where the sidebar drag will appear to work, but the
> > result won't show up in the rendered blog page - this has usually been
> > due to some kind of error with the sidebar - either malformed HTML in
> > the static sidebar, incorrect auth or a bug in the sidebar's code for
> > others.
> >
> > I've not seen the javascript error though.
> >
> > -Chris
> >
> > --
> >  Chris Patti --- Y!: feoh -- AIM: chrisfeohpatti --- E-Mail:
> > cpatti at gmail.com
> > "The greatest dangers to liberty lurk in insidious encroachment by
> > men of
> >   zeal,well-meaning but without understanding."-- Justice Louis O.
> > Brandeis
> >  (Olmstead vs. United States)
> > _______________________________________________
> > Typo-list mailing list
> > Typo-list at rubyforge.org
> > http://rubyforge.org/mailman/listinfo/typo-list
>
> _______________________________________________
> Typo-list mailing list
> Typo-list at rubyforge.org
> http://rubyforge.org/mailman/listinfo/typo-list
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://rubyforge.org/pipermail/typo-list/attachments/20070606/9309d2f7/attachment.html 

From pdcawley at bofh.org.uk  Thu Jun  7 05:32:37 2007
From: pdcawley at bofh.org.uk (Piers Cawley)
Date: Thu, 7 Jun 2007 10:32:37 +0100
Subject: [typo] Typo being slow after new posts
In-Reply-To: <D60716EB-9E45-4FCE-BAE2-0529FB634C8E@mac.com>
References: <FB675D85-0B6B-4301-9CA2-C081A78935D8@mac.com>
	<897e96cc0706060118l7b1ad187h4d10f57c46641037@mail.gmail.com>
	<D60716EB-9E45-4FCE-BAE2-0529FB634C8E@mac.com>
Message-ID: <897e96cc0706070232w4145d004ydd6fcb514965ec4a@mail.gmail.com>

On 06/06/07, Eamon Ford <eamonford at mac.com> wrote:
>
> On Jun 6, 2007, at 1:18 AM, Piers Cawley wrote:
>
> > On 05/06/07, Eamon Ford <eamonford at mac.com> wrote:
> >> Hi all,
> >> Whenever I adjust my Typo settings, post a new entry, or post a
> >> comment, it takes Typo about 1 minute to load, the next time I load a
> >> page. Then after that first time, it works fine until the next time
> >> something is adjusted. Does anyone know what might be wrong here?
> >
> > What version of typo are you using?
> >
> Sorry, forgot to mention that: I'm using Typo 4.1.1.

One minute's pretty extreme to render a page - do you know what kind
of load the system is under? (There have been cases when the system
takes a long time to respond to a change because it's taking a long
time to flush the cache - and cache flushing is on mental 'to be
fixed' list, but it doesn't usually take so long to render a page...
What sidebars are you using? Are many of them based on RSS feeds?

> > Tangentially, it would be really handy if we had an
> > /admin/about_this_typo link somewhere which would give us a nice
> > potted description of the typo installation and its environment.
>
> How would I go about doing that? Does Typo have a page that shows all
> the installation info, or should I make it myself? Sorry, I'm new to
> Typo, so I don't know the ins and outs.

Ah, that was aimed more at the list in general than you in particular.
Typo doesn't have a page that shows all the installation info, and I'm
not quite sure what info really needs to go there... probably
something along the lines of Ruby version, RAILS_ENV, Caching state,
operating system, database, schema version, typo version and/or SVN
revision, list of plugins installed, a pretty printed representation
of blog.settings, List of sidebars. (All this needs to have any
passwords obscured, of course...)

From toby-typo at bryans.org  Thu Jun  7 05:44:35 2007
From: toby-typo at bryans.org (Toby Bryans)
Date: Thu, 7 Jun 2007 10:44:35 +0100
Subject: [typo] Typo being slow after new posts
In-Reply-To: <897e96cc0706070232w4145d004ydd6fcb514965ec4a@mail.gmail.com>
References: <FB675D85-0B6B-4301-9CA2-C081A78935D8@mac.com>
	<897e96cc0706060118l7b1ad187h4d10f57c46641037@mail.gmail.com>
	<D60716EB-9E45-4FCE-BAE2-0529FB634C8E@mac.com>
	<897e96cc0706070232w4145d004ydd6fcb514965ec4a@mail.gmail.com>
Message-ID: <9532DB41-69F8-4AB8-BC25-5668E8A83FF5@bryans.org>

Hi,

On 7 Jun 2007, at 10:32, Piers Cawley wrote:
> One minute's pretty extreme to render a page - do you know what kind
> of load the system is under? (There have been cases when the system
> takes a long time to respond to a change because it's taking a long
> time to flush the cache - and cache flushing is on mental 'to be
> fixed' list, but it doesn't usually take so long to render a page...
> What sidebars are you using? Are many of them based on RSS feeds?

I'm not sure if this is related but since 4.1 I have noticed similar  
behaviour. I have three static sidebar entries and I have had cause  
to change them occasionally. I have noticed that the first time I  
make a change it is quick as you like, but if I make a second change  
without reloading the page then the progress indicator keeps  
spinning. However, if I reload the page between changes then it is  
fine. The sidebars I have enabled are:

Static x3
Tags
Categories
Archives
XML Syndication

-- 
Toby

From eamonford at mac.com  Thu Jun  7 13:42:54 2007
From: eamonford at mac.com (Eamon Ford)
Date: Thu, 7 Jun 2007 10:42:54 -0700
Subject: [typo] Typo being slow after new posts
In-Reply-To: <9532DB41-69F8-4AB8-BC25-5668E8A83FF5@bryans.org>
References: <FB675D85-0B6B-4301-9CA2-C081A78935D8@mac.com>
	<897e96cc0706060118l7b1ad187h4d10f57c46641037@mail.gmail.com>
	<D60716EB-9E45-4FCE-BAE2-0529FB634C8E@mac.com>
	<897e96cc0706070232w4145d004ydd6fcb514965ec4a@mail.gmail.com>
	<9532DB41-69F8-4AB8-BC25-5668E8A83FF5@bryans.org>
Message-ID: <A36D5687-3959-4953-9B14-E46EE9DE325C@mac.com>

I don't think that's related, but I also have exactly the same problem.


On Jun 7, 2007, at 2:44 AM, Toby Bryans wrote:

> Hi,
>
> On 7 Jun 2007, at 10:32, Piers Cawley wrote:
>> One minute's pretty extreme to render a page - do you know what kind
>> of load the system is under? (There have been cases when the system
>> takes a long time to respond to a change because it's taking a long
>> time to flush the cache - and cache flushing is on mental 'to be
>> fixed' list, but it doesn't usually take so long to render a page...
>> What sidebars are you using? Are many of them based on RSS feeds?
>
> I'm not sure if this is related but since 4.1 I have noticed similar
> behaviour. I have three static sidebar entries and I have had cause
> to change them occasionally. I have noticed that the first time I
> make a change it is quick as you like, but if I make a second change
> without reloading the page then the progress indicator keeps
> spinning. However, if I reload the page between changes then it is
> fine. The sidebars I have enabled are:
>
> Static x3
> Tags
> Categories
> Archives
> XML Syndication
>
> -- 
> Toby
> _______________________________________________
> Typo-list mailing list
> Typo-list at rubyforge.org
> http://rubyforge.org/mailman/listinfo/typo-list


From eamonford at mac.com  Thu Jun  7 13:42:54 2007
From: eamonford at mac.com (Eamon Ford)
Date: Thu, 7 Jun 2007 10:42:54 -0700
Subject: [typo] Typo being slow after new posts
In-Reply-To: <9532DB41-69F8-4AB8-BC25-5668E8A83FF5@bryans.org>
References: <FB675D85-0B6B-4301-9CA2-C081A78935D8@mac.com>
	<897e96cc0706060118l7b1ad187h4d10f57c46641037@mail.gmail.com>
	<D60716EB-9E45-4FCE-BAE2-0529FB634C8E@mac.com>
	<897e96cc0706070232w4145d004ydd6fcb514965ec4a@mail.gmail.com>
	<9532DB41-69F8-4AB8-BC25-5668E8A83FF5@bryans.org>
Message-ID: <A36D5687-3959-4953-9B14-E46EE9DE325C@mac.com>

I don't think that's related, but I also have exactly the same problem.


On Jun 7, 2007, at 2:44 AM, Toby Bryans wrote:

> Hi,
>
> On 7 Jun 2007, at 10:32, Piers Cawley wrote:
>> One minute's pretty extreme to render a page - do you know what kind
>> of load the system is under? (There have been cases when the system
>> takes a long time to respond to a change because it's taking a long
>> time to flush the cache - and cache flushing is on mental 'to be
>> fixed' list, but it doesn't usually take so long to render a page...
>> What sidebars are you using? Are many of them based on RSS feeds?
>
> I'm not sure if this is related but since 4.1 I have noticed similar
> behaviour. I have three static sidebar entries and I have had cause
> to change them occasionally. I have noticed that the first time I
> make a change it is quick as you like, but if I make a second change
> without reloading the page then the progress indicator keeps
> spinning. However, if I reload the page between changes then it is
> fine. The sidebars I have enabled are:
>
> Static x3
> Tags
> Categories
> Archives
> XML Syndication
>
> -- 
> Toby
> _______________________________________________
> Typo-list mailing list
> Typo-list at rubyforge.org
> http://rubyforge.org/mailman/listinfo/typo-list


From eamonford at mac.com  Thu Jun  7 14:23:06 2007
From: eamonford at mac.com (Eamon Ford)
Date: Thu, 7 Jun 2007 11:23:06 -0700
Subject: [typo] Typo being slow after new posts
In-Reply-To: <897e96cc0706070232w4145d004ydd6fcb514965ec4a@mail.gmail.com>
References: <FB675D85-0B6B-4301-9CA2-C081A78935D8@mac.com>
	<897e96cc0706060118l7b1ad187h4d10f57c46641037@mail.gmail.com>
	<D60716EB-9E45-4FCE-BAE2-0529FB634C8E@mac.com>
	<897e96cc0706070232w4145d004ydd6fcb514965ec4a@mail.gmail.com>
Message-ID: <0B159ECD-FC97-4B8B-8B32-B6C36574AB4B@mac.com>


On Jun 7, 2007, at 2:32 AM, Piers Cawley wrote:

> On 06/06/07, Eamon Ford <eamonford at mac.com> wrote:
>>
>> On Jun 6, 2007, at 1:18 AM, Piers Cawley wrote:
>>
>>> On 05/06/07, Eamon Ford <eamonford at mac.com> wrote:
>>>> Hi all,
>>>> Whenever I adjust my Typo settings, post a new entry, or post a
>>>> comment, it takes Typo about 1 minute to load, the next time I  
>>>> load a
>>>> page. Then after that first time, it works fine until the next time
>>>> something is adjusted. Does anyone know what might be wrong here?
>>>
>>> What version of typo are you using?
>>>
>> Sorry, forgot to mention that: I'm using Typo 4.1.1.
>
> One minute's pretty extreme to render a page - do you know what kind
> of load the system is under? (There have been cases when the system
> takes a long time to respond to a change because it's taking a long
> time to flush the cache - and cache flushing is on mental 'to be
> fixed' list, but it doesn't usually take so long to render a page...
> What sidebars are you using? Are many of them based on RSS feeds?
>
Sorry, now that I actually time it, it's not 1 minute... It's about  
25 seconds. Time passes slowly when you're waiting. :) But still, 25  
seconds seems like a long time.
I'm running it on an old 400MHz G3 iMac (which is dedicated to  
serving Typo, so it's not doing anything else processor-intensive).  
When Typo is taking a long time to load, the processor usage goes up  
to about 40-70%... Is this supposed to happen?

>>> Tangentially, it would be really handy if we had an
>>> /admin/about_this_typo link somewhere which would give us a nice
>>> potted description of the typo installation and its environment.
>>
>> How would I go about doing that? Does Typo have a page that shows all
>> the installation info, or should I make it myself? Sorry, I'm new to
>> Typo, so I don't know the ins and outs.
>
> Ah, that was aimed more at the list in general than you in particular.
> Typo doesn't have a page that shows all the installation info, and I'm
> not quite sure what info really needs to go there... probably
> something along the lines of Ruby version, RAILS_ENV, Caching state,
> operating system, database, schema version, typo version and/or SVN
> revision, list of plugins installed, a pretty printed representation
> of blog.settings, List of sidebars. (All this needs to have any
> passwords obscured, of course...)

Ah, OK.

> _______________________________________________
> Typo-list mailing list
> Typo-list at rubyforge.org
> http://rubyforge.org/mailman/listinfo/typo-list


From benr at x-cr.com  Thu Jun  7 15:31:17 2007
From: benr at x-cr.com (Ben Reubenstein)
Date: Thu, 7 Jun 2007 13:31:17 -0600
Subject: [typo] Typo being slow after new posts
In-Reply-To: <0B159ECD-FC97-4B8B-8B32-B6C36574AB4B@mac.com>
References: <FB675D85-0B6B-4301-9CA2-C081A78935D8@mac.com>
	<897e96cc0706060118l7b1ad187h4d10f57c46641037@mail.gmail.com>
	<D60716EB-9E45-4FCE-BAE2-0529FB634C8E@mac.com>
	<897e96cc0706070232w4145d004ydd6fcb514965ec4a@mail.gmail.com>
	<0B159ECD-FC97-4B8B-8B32-B6C36574AB4B@mac.com>
Message-ID: <44c79a160706071231n42d9398ft44cbf5b9c4276c9d@mail.gmail.com>

> I'm running it on an old 400MHz G3 iMac

That is a very slow machine to run a Rails stack on and is probably
one of the reasons for the poor performance.

On 6/7/07, Eamon Ford <eamonford at mac.com> wrote:
>
> On Jun 7, 2007, at 2:32 AM, Piers Cawley wrote:
>
> > On 06/06/07, Eamon Ford <eamonford at mac.com> wrote:
> >>
> >> On Jun 6, 2007, at 1:18 AM, Piers Cawley wrote:
> >>
> >>> On 05/06/07, Eamon Ford <eamonford at mac.com> wrote:
> >>>> Hi all,
> >>>> Whenever I adjust my Typo settings, post a new entry, or post a
> >>>> comment, it takes Typo about 1 minute to load, the next time I
> >>>> load a
> >>>> page. Then after that first time, it works fine until the next time
> >>>> something is adjusted. Does anyone know what might be wrong here?
> >>>
> >>> What version of typo are you using?
> >>>
> >> Sorry, forgot to mention that: I'm using Typo 4.1.1.
> >
> > One minute's pretty extreme to render a page - do you know what kind
> > of load the system is under? (There have been cases when the system
> > takes a long time to respond to a change because it's taking a long
> > time to flush the cache - and cache flushing is on mental 'to be
> > fixed' list, but it doesn't usually take so long to render a page...
> > What sidebars are you using? Are many of them based on RSS feeds?
> >
> Sorry, now that I actually time it, it's not 1 minute... It's about
> 25 seconds. Time passes slowly when you're waiting. :) But still, 25
> seconds seems like a long time.
> I'm running it on an old 400MHz G3 iMac (which is dedicated to
> serving Typo, so it's not doing anything else processor-intensive).
> When Typo is taking a long time to load, the processor usage goes up
> to about 40-70%... Is this supposed to happen?
>
> >>> Tangentially, it would be really handy if we had an
> >>> /admin/about_this_typo link somewhere which would give us a nice
> >>> potted description of the typo installation and its environment.
> >>
> >> How would I go about doing that? Does Typo have a page that shows all
> >> the installation info, or should I make it myself? Sorry, I'm new to
> >> Typo, so I don't know the ins and outs.
> >
> > Ah, that was aimed more at the list in general than you in particular.
> > Typo doesn't have a page that shows all the installation info, and I'm
> > not quite sure what info really needs to go there... probably
> > something along the lines of Ruby version, RAILS_ENV, Caching state,
> > operating system, database, schema version, typo version and/or SVN
> > revision, list of plugins installed, a pretty printed representation
> > of blog.settings, List of sidebars. (All this needs to have any
> > passwords obscured, of course...)
>
> Ah, OK.
>
> > _______________________________________________
> > Typo-list mailing list
> > Typo-list at rubyforge.org
> > http://rubyforge.org/mailman/listinfo/typo-list
>
> _______________________________________________
> Typo-list mailing list
> Typo-list at rubyforge.org
> http://rubyforge.org/mailman/listinfo/typo-list
>


-- 
Ben Reubenstein
303-947-0446
http://www.benr75.com

From eamonford at mac.com  Thu Jun  7 15:34:00 2007
From: eamonford at mac.com (Eamon Ford)
Date: Thu, 7 Jun 2007 12:34:00 -0700
Subject: [typo] Typo being slow after new posts
In-Reply-To: <897e96cc0706070232w4145d004ydd6fcb514965ec4a@mail.gmail.com>
References: <FB675D85-0B6B-4301-9CA2-C081A78935D8@mac.com>
	<897e96cc0706060118l7b1ad187h4d10f57c46641037@mail.gmail.com>
	<D60716EB-9E45-4FCE-BAE2-0529FB634C8E@mac.com>
	<897e96cc0706070232w4145d004ydd6fcb514965ec4a@mail.gmail.com>
Message-ID: <21B789D2-273E-4BF4-BC7F-A8103525AE18@mac.com>


On Jun 7, 2007, at 2:32 AM, Piers Cawley wrote:

> On 06/06/07, Eamon Ford <eamonford at mac.com> wrote:
>>
>> On Jun 6, 2007, at 1:18 AM, Piers Cawley wrote:
>>
>>> On 05/06/07, Eamon Ford <eamonford at mac.com> wrote:
>>>> Hi all,
>>>> Whenever I adjust my Typo settings, post a new entry, or post a
>>>> comment, it takes Typo about 1 minute to load, the next time I  
>>>> load a
>>>> page. Then after that first time, it works fine until the next time
>>>> something is adjusted. Does anyone know what might be wrong here?
>>>
>>> What version of typo are you using?
>>>
>> Sorry, forgot to mention that: I'm using Typo 4.1.1.
>
> One minute's pretty extreme to render a page - do you know what kind
> of load the system is under? (There have been cases when the system
> takes a long time to respond to a change because it's taking a long
> time to flush the cache - and cache flushing is on mental 'to be
> fixed' list, but it doesn't usually take so long to render a page...
> What sidebars are you using? Are many of them based on RSS feeds?

Oops, forgot to mention: the only sidebars I'm using are Static,  
Tags, Categories, Archives, and Syndicate. But I am using the  
<typo:flickr> macro in several instances, if that has any significance.

>
>>> Tangentially, it would be really handy if we had an
>>> /admin/about_this_typo link somewhere which would give us a nice
>>> potted description of the typo installation and its environment.
>>
>> How would I go about doing that? Does Typo have a page that shows all
>> the installation info, or should I make it myself? Sorry, I'm new to
>> Typo, so I don't know the ins and outs.
>
> Ah, that was aimed more at the list in general than you in particular.
> Typo doesn't have a page that shows all the installation info, and I'm
> not quite sure what info really needs to go there... probably
> something along the lines of Ruby version, RAILS_ENV, Caching state,
> operating system, database, schema version, typo version and/or SVN
> revision, list of plugins installed, a pretty printed representation
> of blog.settings, List of sidebars. (All this needs to have any
> passwords obscured, of course...)
> _______________________________________________
> Typo-list mailing list
> Typo-list at rubyforge.org
> http://rubyforge.org/mailman/listinfo/typo-list


From eamonford at mac.com  Thu Jun  7 15:42:20 2007
From: eamonford at mac.com (Eamon Ford)
Date: Thu, 7 Jun 2007 12:42:20 -0700
Subject: [typo] Typo being slow after new posts
In-Reply-To: <44c79a160706071231n42d9398ft44cbf5b9c4276c9d@mail.gmail.com>
References: <FB675D85-0B6B-4301-9CA2-C081A78935D8@mac.com>
	<897e96cc0706060118l7b1ad187h4d10f57c46641037@mail.gmail.com>
	<D60716EB-9E45-4FCE-BAE2-0529FB634C8E@mac.com>
	<897e96cc0706070232w4145d004ydd6fcb514965ec4a@mail.gmail.com>
	<0B159ECD-FC97-4B8B-8B32-B6C36574AB4B@mac.com>
	<44c79a160706071231n42d9398ft44cbf5b9c4276c9d@mail.gmail.com>
Message-ID: <B2A53A56-4E74-4041-8454-1F06EED66252@mac.com>


On Jun 7, 2007, at 12:31 PM, Ben Reubenstein wrote:

>> I'm running it on an old 400MHz G3 iMac
>
> That is a very slow machine to run a Rails stack on and is probably
> one of the reasons for the poor performance.
>
Yeah, that's what I thought, but it seems to be doing fine until any  
adjustment is made... Is it the cache flushing that's making it slow?  
If so, do you have any idea when this might be changed?

> On 6/7/07, Eamon Ford <eamonford at mac.com> wrote:
>>
>> On Jun 7, 2007, at 2:32 AM, Piers Cawley wrote:
>>
>>> On 06/06/07, Eamon Ford <eamonford at mac.com> wrote:
>>>>
>>>> On Jun 6, 2007, at 1:18 AM, Piers Cawley wrote:
>>>>
>>>>> On 05/06/07, Eamon Ford <eamonford at mac.com> wrote:
>>>>>> Hi all,
>>>>>> Whenever I adjust my Typo settings, post a new entry, or post a
>>>>>> comment, it takes Typo about 1 minute to load, the next time I
>>>>>> load a
>>>>>> page. Then after that first time, it works fine until the next  
>>>>>> time
>>>>>> something is adjusted. Does anyone know what might be wrong here?
>>>>>
>>>>> What version of typo are you using?
>>>>>
>>>> Sorry, forgot to mention that: I'm using Typo 4.1.1.
>>>
>>> One minute's pretty extreme to render a page - do you know what kind
>>> of load the system is under? (There have been cases when the system
>>> takes a long time to respond to a change because it's taking a long
>>> time to flush the cache - and cache flushing is on mental 'to be
>>> fixed' list, but it doesn't usually take so long to render a page...
>>> What sidebars are you using? Are many of them based on RSS feeds?
>>>
>> Sorry, now that I actually time it, it's not 1 minute... It's about
>> 25 seconds. Time passes slowly when you're waiting. :) But still, 25
>> seconds seems like a long time.
>> I'm running it on an old 400MHz G3 iMac (which is dedicated to
>> serving Typo, so it's not doing anything else processor-intensive).
>> When Typo is taking a long time to load, the processor usage goes up
>> to about 40-70%... Is this supposed to happen?
>>
>>>>> Tangentially, it would be really handy if we had an
>>>>> /admin/about_this_typo link somewhere which would give us a nice
>>>>> potted description of the typo installation and its environment.
>>>>
>>>> How would I go about doing that? Does Typo have a page that  
>>>> shows all
>>>> the installation info, or should I make it myself? Sorry, I'm  
>>>> new to
>>>> Typo, so I don't know the ins and outs.
>>>
>>> Ah, that was aimed more at the list in general than you in  
>>> particular.
>>> Typo doesn't have a page that shows all the installation info,  
>>> and I'm
>>> not quite sure what info really needs to go there... probably
>>> something along the lines of Ruby version, RAILS_ENV, Caching state,
>>> operating system, database, schema version, typo version and/or SVN
>>> revision, list of plugins installed, a pretty printed representation
>>> of blog.settings, List of sidebars. (All this needs to have any
>>> passwords obscured, of course...)
>>
>> Ah, OK.
>>
>>> _______________________________________________
>>> Typo-list mailing list
>>> Typo-list at rubyforge.org
>>> http://rubyforge.org/mailman/listinfo/typo-list
>>
>> _______________________________________________
>> Typo-list mailing list
>> Typo-list at rubyforge.org
>> http://rubyforge.org/mailman/listinfo/typo-list
>>
>
>
> -- 
> Ben Reubenstein
> 303-947-0446
> http://www.benr75.com
> _______________________________________________
> Typo-list mailing list
> Typo-list at rubyforge.org
> http://rubyforge.org/mailman/listinfo/typo-list


From Matijs.van.Zuijlen at xs4all.nl  Fri Jun  8 08:02:38 2007
From: Matijs.van.Zuijlen at xs4all.nl (Matijs van Zuijlen)
Date: Fri, 8 Jun 2007 14:02:38 +0200
Subject: [typo] Can't check out whole typo subversion tree
In-Reply-To: <29A8B6E1-3152-4A8E-9D55-026A9BADBA1F@folkwolf.net>
References: <20070526130157.GA24898@matijs.net>
	<B3B7DF07-8C05-4332-AF1F-9F2980A8E336@7el.net>
	<20070603084348.GB4319@matijs.net>
	<29A8B6E1-3152-4A8E-9D55-026A9BADBA1F@folkwolf.net>
Message-ID: <20070608120238.GA16924@matijs.net>

On Sun, Jun 03, 2007 at 08:11:15PM -0400, Matt Rose wrote:
> 
> That's the trunk version of the full repo.  SVN uses different  
> directories to represent branches.  If you want the old 4.0 branch,  
> you would check out
> 
> http://svn.typosphere.org/typo/branches/branch_4_0_x/

Yes, I know that. I was using svk to mirror the _whole_ repository[1], and
that stopped working. So, now I added another mirror of just the trunk,
leaving the old mirror hanging around taking up space. Not a big problem,
just annoying.

[1] This is nice for comparing versions, for example, if you're using svk
anyway. The reason I'm using svk is that I want to have my customizations
under source control.

-- 
Matijs van Zuijlen					http://www.matijs.net/
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 189 bytes
Desc: Digital signature
Url : http://rubyforge.org/pipermail/typo-list/attachments/20070608/c5f87e07/attachment.bin 

From Matijs.van.Zuijlen at xs4all.nl  Sat Jun  9 03:18:04 2007
From: Matijs.van.Zuijlen at xs4all.nl (Matijs van Zuijlen)
Date: Sat, 9 Jun 2007 09:18:04 +0200
Subject: [typo] defined $TESTING
Message-ID: <20070609071804.GB16924@matijs.net>

Hi,

The copy of memcache.rb in typo's trunk has the line

  $TESTING = defined? $TESTING

at the top. This means that after including memcache, $TESTING is
definitely defined. If we're testing, it's true, if not, it's defined and
false.

In the typo code elsewhere, the checks for testing mode only check whether
$TESTING is defined, not what its actual value is.

This means typo always runs in testing mode!

I believe this is the main reason threaded trackback pings were not
working properly.

-- 
Matijs van Zuijlen					http://www.matijs.net/
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 189 bytes
Desc: Digital signature
Url : http://rubyforge.org/pipermail/typo-list/attachments/20070609/9c9126f6/attachment.bin 

From pdcawley at bofh.org.uk  Sat Jun  9 03:27:39 2007
From: pdcawley at bofh.org.uk (Piers Cawley)
Date: Sat, 9 Jun 2007 08:27:39 +0100
Subject: [typo] defined $TESTING
In-Reply-To: <20070609071804.GB16924@matijs.net>
References: <20070609071804.GB16924@matijs.net>
Message-ID: <897e96cc0706090027wa1e5fc6u700650bab80b86df@mail.gmail.com>

On 09/06/07, Matijs van Zuijlen <Matijs.van.Zuijlen at xs4all.nl> wrote:
> Hi,
>
> The copy of memcache.rb in typo's trunk has the line
>
>   $TESTING = defined? $TESTING
>
> at the top. This means that after including memcache, $TESTING is
> definitely defined. If we're testing, it's true, if not, it's defined and
> false.
>
> In the typo code elsewhere, the checks for testing mode only check whether
> $TESTING is defined, not what its actual value is.
>
> This means typo always runs in testing mode!
>
> I believe this is the main reason threaded trackback pings were not
> working properly.

Oh dear ghod! Thanks for the spot. I shall fix it immediately.

From thomas.guest at gmail.com  Mon Jun 11 06:19:00 2007
From: thomas.guest at gmail.com (Thomas Guest)
Date: Mon, 11 Jun 2007 11:19:00 +0100
Subject: [typo] Text filter problem migrating from 4.03 to 4.1
Message-ID: <743a92df0706110319g44fadc9bre5ef3588f652eedc@mail.gmail.com>

I'm having trouble migrating from typo 4.03 to 4.1.

Specifically, the <typo:code>...</typo:code> syntax filter isn't
working properly for me at 4.1.

When I look at the rendered HTML, it shows something like:

<p><typo:code>
...
</typo:code></p>

I.e. the syntax filter hasn't been applied for some reason.

What's really perplexing is that this same migration worked just fine
when I practiced at home. There are plenty of differences between my
home and shared server setup, and I don't really know where to start
looking for a solution to this one.

Inspecting the CHANGES-4.1 file suggests things have changed in this area.

Any pointers gratefully accepted. (But note my hands are somewhat tied
on the shared server -- it's not meant for doing development work).

The most relevant looking section of the production.log reads:

Processing ArticlesController#permalink (for 87.80.246.57 at
2007-06-11 08:06:36) [GET]
  Parameters: {"month"=>"04", "title"=>"high-altitude-programming",
"action"=>"permalink", "day"=>"13", "controller"=>"articles",
"year"=>"2007"}
Filter chain halted as
[#<ActionController::Caching::ActionParams::ActionParamCacheFilter:0x9b0f3fc
@actions=[:index, :read, :permalink, :category, :find_by_date,
:archives, :view_page, :tag, :author]>] returned false.
Completed in 0.08282 (12 reqs/sec) | Rendering: 0.00011 (0%) | DB:
0.00000 (0%) | 304 Not Modified
[http://blog.wordaligned.org/articles/2007/04/13/high-altitude-programming]

Thanks in advance,
-- 
Thomas Guest
http://www.wordaligned.org

From cunctator at gmail.com  Mon Jun 11 19:15:28 2007
From: cunctator at gmail.com (The Cunctator)
Date: Mon, 11 Jun 2007 19:15:28 -0400
Subject: [typo] Extending articles
Message-ID: <dfd0b40706111615t27b4772dha56767dfc0e7a755@mail.gmail.com>

This is certainly a case of there being a Thousand Ways to Do It, but I'm
looking for suggestions/guidance as a novice RoR coder.

Essentially, I have a calendar of events that I would like to extend with
Typo functionality.

The events are loaded automatically from an outside source.

The functionality I would like to add is
1) Allow people to add comments, tags, categories to each individual event
listing (e.g. to treat the listing like a blog article)
2) Write blog posts which draw info from specified events (e.g. to write
non-event articles which include from an event)

I have a well-defined Event class.

If there's a way for an article to dynamically draw content from a ruby
element then I can just save an article when I save an event.

e.g.

events_controller.rb
class EventsController < ApplicationController

def create
  @event = Event.new(params[:event])
  @event.save
  @article = this_blog.articles.build .... ???
  @article.save
end

I'd of course like to do this in a ruby-esque way that reuses code instead
doing nasty cut-and-pastes.

Let me know if I'm asking for a reinvention of the wheel.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://rubyforge.org/pipermail/typo-list/attachments/20070611/74fc3361/attachment.html 

From malvim at gmail.com  Mon Jun 11 19:34:20 2007
From: malvim at gmail.com (Marcelo Alvim)
Date: Mon, 11 Jun 2007 16:34:20 -0700
Subject: [typo] RSS Blog
Message-ID: <97a867330706111634y6855c84bj5fe8e7520670f45b@mail.gmail.com>

Hi,

I am a newbie to Typo, and have a one-year experience with Ruby and
Rails. I have a quick question:

Would it be very hard for me to set up a blog that has posts that are
actually an aggregation of RSS feeds?

My idea is to set up blogs for me and a couple of friends, but have
one "master blog" that would aggregate posts from all our blogs and
show them ordered by date and with links pointing to the actual
individual blogs, archives aggregating individual blog's archives, and
the like.

I hope I could make myself clear.

I am thinking that the best way to do that would be to install one
typo instance for each one of us, and one more for the master blog
thing, in which I'd have to install a plug-in written by myself that
accomplished said tasks.

Is this the right way to go about doing this? And should this be too
hard to do, being that I am not the best Rails developer around? :)

Thanks for any feedback you can give me.

Cheers,
Marcelo.

From cpatti at gmail.com  Tue Jun 12 10:28:56 2007
From: cpatti at gmail.com (Chris Patti)
Date: Tue, 12 Jun 2007 10:28:56 -0400
Subject: [typo] defined $TESTING
In-Reply-To: <897e96cc0706090027wa1e5fc6u700650bab80b86df@mail.gmail.com>
References: <20070609071804.GB16924@matijs.net>
	<897e96cc0706090027wa1e5fc6u700650bab80b86df@mail.gmail.com>
Message-ID: <7b528f860706120728h1e936bd9ob1bbac76414c57a0@mail.gmail.com>

On 6/9/07, Piers Cawley <pdcawley at bofh.org.uk> wrote:
> On 09/06/07, Matijs van Zuijlen <Matijs.van.Zuijlen at xs4all.nl> wrote:
> > Hi,
> >
> > The copy of memcache.rb in typo's trunk has the line
> >
> >   $TESTING = defined? $TESTING
> >
> > at the top. This means that after including memcache, $TESTING is
> > definitely defined. If we're testing, it's true, if not, it's defined and
> > false.
> >
> > In the typo code elsewhere, the checks for testing mode only check whether
> > $TESTING is defined, not what its actual value is.
> >
> > This means typo always runs in testing mode!
> >
> > I believe this is the main reason threaded trackback pings were not
> > working properly.
>
> Oh dear ghod! Thanks for the spot. I shall fix it immediately.

Thanks indeed.  For those of us running the gem, just comment out or
delete the $TESTING = defined? $TESTING line and watch your Typo
instance go Vroom :)

-Chris

-- 
 Chris Patti --- Y!: feoh -- AIM: chrisfeohpatti --- E-Mail:  cpatti at gmail.com
"The greatest dangers to liberty lurk in insidious encroachment by men of
  zeal,well-meaning but without understanding."-- Justice Louis O. Brandeis
 (Olmstead vs. United States)

From mattrose at folkwolf.net  Tue Jun 12 17:29:56 2007
From: mattrose at folkwolf.net (Matt Rose)
Date: Tue, 12 Jun 2007 17:29:56 -0400
Subject: [typo] RSS Blog
In-Reply-To: <97a867330706111634y6855c84bj5fe8e7520670f45b@mail.gmail.com>
References: <97a867330706111634y6855c84bj5fe8e7520670f45b@mail.gmail.com>
Message-ID: <0E621A9E-DF40-4286-9825-454FB9E97129@folkwolf.net>


I have a sidebar plugin that actually does something similar.  I gave  
up on it after there was too much a performance hit to the blog to  
have it running, but I can email the code if you want

Even if not, look into Feedtools.  It hooks into rails nicely.

Matt

On 11-Jun-07, at 7:34 PM, Marcelo Alvim wrote:

> Hi,
>
> I am a newbie to Typo, and have a one-year experience with Ruby and
> Rails. I have a quick question:
>
> Would it be very hard for me to set up a blog that has posts that are
> actually an aggregation of RSS feeds?
>
> My idea is to set up blogs for me and a couple of friends, but have
> one "master blog" that would aggregate posts from all our blogs and
> show them ordered by date and with links pointing to the actual
> individual blogs, archives aggregating individual blog's archives, and
> the like.
>
> I hope I could make myself clear.
>
> I am thinking that the best way to do that would be to install one
> typo instance for each one of us, and one more for the master blog
> thing, in which I'd have to install a plug-in written by myself that
> accomplished said tasks.
>
> Is this the right way to go about doing this? And should this be too
> hard to do, being that I am not the best Rails developer around? :)
>
> Thanks for any feedback you can give me.
>
> Cheers,
> Marcelo.
> _______________________________________________
> Typo-list mailing list
> Typo-list at rubyforge.org
> http://rubyforge.org/mailman/listinfo/typo-list


From malvim at gmail.com  Wed Jun 13 17:59:31 2007
From: malvim at gmail.com (Marcelo Alvim)
Date: Wed, 13 Jun 2007 14:59:31 -0700
Subject: [typo] RSS Blog
In-Reply-To: <0E621A9E-DF40-4286-9825-454FB9E97129@folkwolf.net>
References: <97a867330706111634y6855c84bj5fe8e7520670f45b@mail.gmail.com>
	<0E621A9E-DF40-4286-9825-454FB9E97129@folkwolf.net>
Message-ID: <97a867330706131459r2b868e68w5f63ff65bac520df@mail.gmail.com>

This seems nice, I will definitely take a look at Feedtools (although
it seems to be abandoned).

But after getting all the RSS feeds (which I think I could even
aggregate and order using some online tool like Yahoo Pipes or
something), is it possible to show them as actual blog posts, using
the teams, showing archives, and all that?

Thanks for your help,
Marcelo.

On 6/12/07, Matt Rose <mattrose at folkwolf.net> wrote:
>
> I have a sidebar plugin that actually does something similar.  I gave
> up on it after there was too much a performance hit to the blog to
> have it running, but I can email the code if you want
>
> Even if not, look into Feedtools.  It hooks into rails nicely.
>
> Matt
>
> On 11-Jun-07, at 7:34 PM, Marcelo Alvim wrote:
>
> > Hi,
> >
> > I am a newbie to Typo, and have a one-year experience with Ruby and
> > Rails. I have a quick question:
> >
> > Would it be very hard for me to set up a blog that has posts that are
> > actually an aggregation of RSS feeds?
> >
> > My idea is to set up blogs for me and a couple of friends, but have
> > one "master blog" that would aggregate posts from all our blogs and
> > show them ordered by date and with links pointing to the actual
> > individual blogs, archives aggregating individual blog's archives, and
> > the like.
> >
> > I hope I could make myself clear.
> >
> > I am thinking that the best way to do that would be to install one
> > typo instance for each one of us, and one more for the master blog
> > thing, in which I'd have to install a plug-in written by myself that
> > accomplished said tasks.
> >
> > Is this the right way to go about doing this? And should this be too
> > hard to do, being that I am not the best Rails developer around? :)
> >
> > Thanks for any feedback you can give me.
> >
> > Cheers,
> > Marcelo.
> > _______________________________________________
> > Typo-list mailing list
> > Typo-list at rubyforge.org
> > http://rubyforge.org/mailman/listinfo/typo-list
>
> _______________________________________________
> Typo-list mailing list
> Typo-list at rubyforge.org
> http://rubyforge.org/mailman/listinfo/typo-list
>

From mattrose at folkwolf.net  Wed Jun 13 19:34:20 2007
From: mattrose at folkwolf.net (Matt Rose)
Date: Wed, 13 Jun 2007 19:34:20 -0400
Subject: [typo] RSS Blog
In-Reply-To: <97a867330706131459r2b868e68w5f63ff65bac520df@mail.gmail.com>
References: <97a867330706111634y6855c84bj5fe8e7520670f45b@mail.gmail.com>
	<0E621A9E-DF40-4286-9825-454FB9E97129@folkwolf.net>
	<97a867330706131459r2b868e68w5f63ff65bac520df@mail.gmail.com>
Message-ID: <0BFCBB86-E694-4F27-B416-CC8578EB2F59@folkwolf.net>


Yeah, I noticed that after I sent the email.  I mean to send him an  
email and tell him that I'll look take up the project if he can't  
find any other takers.  It has some nice features that no other rss/ 
atom parser has.

Matt

On 13-Jun-07, at 5:59 PM, Marcelo Alvim wrote:

> This seems nice, I will definitely take a look at Feedtools (although
> it seems to be abandoned).
>
> But after getting all the RSS feeds (which I think I could even
> aggregate and order using some online tool like Yahoo Pipes or
> something), is it possible to show them as actual blog posts, using
> the teams, showing archives, and all that?
>
> Thanks for your help,
> Marcelo.
>
> On 6/12/07, Matt Rose <mattrose at folkwolf.net> wrote:
>>
>> I have a sidebar plugin that actually does something similar.  I gave
>> up on it after there was too much a performance hit to the blog to
>> have it running, but I can email the code if you want
>>
>> Even if not, look into Feedtools.  It hooks into rails nicely.
>>
>> Matt
>>
>> On 11-Jun-07, at 7:34 PM, Marcelo Alvim wrote:
>>
>>> Hi,
>>>
>>> I am a newbie to Typo, and have a one-year experience with Ruby and
>>> Rails. I have a quick question:
>>>
>>> Would it be very hard for me to set up a blog that has posts that  
>>> are
>>> actually an aggregation of RSS feeds?
>>>
>>> My idea is to set up blogs for me and a couple of friends, but have
>>> one "master blog" that would aggregate posts from all our blogs and
>>> show them ordered by date and with links pointing to the actual
>>> individual blogs, archives aggregating individual blog's  
>>> archives, and
>>> the like.
>>>
>>> I hope I could make myself clear.
>>>
>>> I am thinking that the best way to do that would be to install one
>>> typo instance for each one of us, and one more for the master blog
>>> thing, in which I'd have to install a plug-in written by myself that
>>> accomplished said tasks.
>>>
>>> Is this the right way to go about doing this? And should this be too
>>> hard to do, being that I am not the best Rails developer around? :)
>>>
>>> Thanks for any feedback you can give me.
>>>
>>> Cheers,
>>> Marcelo.
>>> _______________________________________________
>>> Typo-list mailing list
>>> Typo-list at rubyforge.org
>>> http://rubyforge.org/mailman/listinfo/typo-list
>>
>> _______________________________________________
>> Typo-list mailing list
>> Typo-list at rubyforge.org
>> http://rubyforge.org/mailman/listinfo/typo-list
>>
> _______________________________________________
> Typo-list mailing list
> Typo-list at rubyforge.org
> http://rubyforge.org/mailman/listinfo/typo-list


From malvim at gmail.com  Thu Jun 14 18:42:15 2007
From: malvim at gmail.com (Marcelo Alvim)
Date: Thu, 14 Jun 2007 15:42:15 -0700
Subject: [typo] RSS Blog
In-Reply-To: <0BFCBB86-E694-4F27-B416-CC8578EB2F59@folkwolf.net>
References: <97a867330706111634y6855c84bj5fe8e7520670f45b@mail.gmail.com>
	<0E621A9E-DF40-4286-9825-454FB9E97129@folkwolf.net>
	<97a867330706131459r2b868e68w5f63ff65bac520df@mail.gmail.com>
	<0BFCBB86-E694-4F27-B416-CC8578EB2F59@folkwolf.net>
Message-ID: <97a867330706141542h729d3774wae664e1c01b58b6b@mail.gmail.com>

Actually, maybe I'm introducing this question in the wrong way...

My plan is to have an installation of Typo that presents all the posts
from other Typo instances. It's posts would be those of the other
instances, it's archives would be made of posts from the other
instances, and so on.

One of the ideas I had to implement such a thing was to aggregate all
the other blogs' RSS feeds and order them by date. But maybe writing a
plugin that actually accesses the other instances in a more direct way
is even easier. I don't know how easy it would be to use ActiveRecrod
and Typo's model classes to access different databases, though.

What do you think?

By the way, Matt, thanks for your help and good luck on taking up
Feedtools, it seems like a nice project.

Thanks,
Marcelo.

On 6/13/07, Matt Rose <mattrose at folkwolf.net> wrote:
>
> Yeah, I noticed that after I sent the email.  I mean to send him an
> email and tell him that I'll look take up the project if he can't
> find any other takers.  It has some nice features that no other rss/
> atom parser has.
>
> Matt
>
> On 13-Jun-07, at 5:59 PM, Marcelo Alvim wrote:
>
> > This seems nice, I will definitely take a look at Feedtools (although
> > it seems to be abandoned).
> >
> > But after getting all the RSS feeds (which I think I could even
> > aggregate and order using some online tool like Yahoo Pipes or
> > something), is it possible to show them as actual blog posts, using
> > the teams, showing archives, and all that?
> >
> > Thanks for your help,
> > Marcelo.
> >
> > On 6/12/07, Matt Rose <mattrose at folkwolf.net> wrote:
> >>
> >> I have a sidebar plugin that actually does something similar.  I gave
> >> up on it after there was too much a performance hit to the blog to
> >> have it running, but I can email the code if you want
> >>
> >> Even if not, look into Feedtools.  It hooks into rails nicely.
> >>
> >> Matt
> >>
> >> On 11-Jun-07, at 7:34 PM, Marcelo Alvim wrote:
> >>
> >>> Hi,
> >>>
> >>> I am a newbie to Typo, and have a one-year experience with Ruby and
> >>> Rails. I have a quick question:
> >>>
> >>> Would it be very hard for me to set up a blog that has posts that
> >>> are
> >>> actually an aggregation of RSS feeds?
> >>>
> >>> My idea is to set up blogs for me and a couple of friends, but have
> >>> one "master blog" that would aggregate posts from all our blogs and
> >>> show them ordered by date and with links pointing to the actual
> >>> individual blogs, archives aggregating individual blog's
> >>> archives, and
> >>> the like.
> >>>
> >>> I hope I could make myself clear.
> >>>
> >>> I am thinking that the best way to do that would be to install one
> >>> typo instance for each one of us, and one more for the master blog
> >>> thing, in which I'd have to install a plug-in written by myself that
> >>> accomplished said tasks.
> >>>
> >>> Is this the right way to go about doing this? And should this be too
> >>> hard to do, being that I am not the best Rails developer around? :)
> >>>
> >>> Thanks for any feedback you can give me.
> >>>
> >>> Cheers,
> >>> Marcelo.
> >>> _______________________________________________
> >>> Typo-list mailing list
> >>> Typo-list at rubyforge.org
> >>> http://rubyforge.org/mailman/listinfo/typo-list
> >>
> >> _______________________________________________
> >> Typo-list mailing list
> >> Typo-list at rubyforge.org
> >> http://rubyforge.org/mailman/listinfo/typo-list
> >>
> > _______________________________________________
> > Typo-list mailing list
> > Typo-list at rubyforge.org
> > http://rubyforge.org/mailman/listinfo/typo-list
>
> _______________________________________________
> Typo-list mailing list
> Typo-list at rubyforge.org
> http://rubyforge.org/mailman/listinfo/typo-list
>

From rodgerd at diaspora.gen.nz  Tue Jun 19 05:56:58 2007
From: rodgerd at diaspora.gen.nz (Rodger Donaldson)
Date: Tue, 19 Jun 2007 21:56:58 +1200
Subject: [typo] Lightbox macro in Typo 4.1.1
Message-ID: <20070619095658.GB1667@diaspora.gen.nz>


A question about lightbox functionality: I'm using a scribblish-based
theme on a web site, and have the <%= page_header %> declaration, as
required.

Using the standard syntax per the macro documentation:

<typo:lightbox src="/files/myimage.png" thumbsrc="/files/myimage-thumb.png"/>

...does not extrude beautiful pop-up images in all their glory; on the
contrary, the macro doesn't appear to be expanded at all, and appears
in the dcument verbatim.  This, of course, means the lightbox stuff
doesn't work.  What, then, am I missing?

-- 
Rodger Donaldson		rodgerd at diaspora.gen.nz
"In this stupid industry, anything over two pages is an epic."

From thomas.guest at gmail.com  Tue Jun 19 06:56:37 2007
From: thomas.guest at gmail.com (Thomas Guest)
Date: Tue, 19 Jun 2007 10:56:37 +0000 (UTC)
Subject: [typo] Lightbox macro in Typo 4.1.1
References: <20070619095658.GB1667@diaspora.gen.nz>
Message-ID: <loom.20070619T125208-679@post.gmane.org>

Rodger Donaldson <rodgerd <at> diaspora.gen.nz> writes:

> 
> 
> A question about lightbox functionality: I'm using a scribblish-based
> theme on a web site, and have the <%= page_header %> declaration, as
> required.
> 
> Using the standard syntax per the macro documentation:
> 
> <typo:lightbox src="/files/myimage.png" thumbsrc="/files/myimage-thumb.png"/>
> 
> ...does not extrude beautiful pop-up images in all their glory; on the
> contrary, the macro doesn't appear to be expanded at all, and appears
> in the dcument verbatim.  This, of course, means the lightbox stuff
> doesn't work.  What, then, am I missing?
> 

I'm wondering if this is related to a similar problem I reported recently with
<typo:code>...</typo:code> filters?

If you create a page containing something like:

<typo:code>
int main()
{
    return 0;
}
</typo:code>

then does the typo:code macro get expanded? (Sorry, I don't have a more helpful
answer to the question!)




From listguy at poplar.com  Wed Jun 20 14:23:51 2007
From: listguy at poplar.com (John Browning)
Date: Wed, 20 Jun 2007 19:23:51 +0100
Subject: [typo] markdown via textmate
Message-ID: <27DBEB17-9B52-4397-B0DA-9147455DA2B6@poplar.com>

Please forgive what may be a stupid question...

I'm new to typo and trying to post with markdown from textmate via  
the blogging bundle. The post goes through fine, but the markdown  
filter is not automatically applied. If I root around in the admin  
interface and edit the post to apply the markdown filter manually,  
all is fine. Is there any way -- possibly something obvious I've  
missed -- to apply the markdown filter to xmlrpc posts automatically?  
(I've set markdown with smartypants as the default from the admin  
interface, and that works fine from markdown posted from there;  
similarly html from textmate seems to work OK...)

Alternatively, if there is no easy way, does anybody have pointers/ 
advice to the appropriate code to start work on a work-around/ 
solution? (presumably somewhere in the meta_weblog_service.api?)

Thanks for any time and advice...

allbests,


........................................................................ 
............................
John Browning





From cpatti at gmail.com  Wed Jun 20 15:17:12 2007
From: cpatti at gmail.com (Chris Patti)
Date: Wed, 20 Jun 2007 15:17:12 -0400
Subject: [typo] markdown via textmate
In-Reply-To: <27DBEB17-9B52-4397-B0DA-9147455DA2B6@poplar.com>
References: <27DBEB17-9B52-4397-B0DA-9147455DA2B6@poplar.com>
Message-ID: <7b528f860706201217n11f63f4ldcacb9344ee5ede8@mail.gmail.com>

On 6/20/07, John Browning <listguy at poplar.com> wrote:
>
> Please forgive what may be a stupid question...
>
> I'm new to typo and trying to post with markdown from textmate via
> the blogging bundle. The post goes through fine, but the markdown
> filter is not automatically applied. If I root around in the admin
> interface and edit the post to apply the markdown filter manually,
> all is fine. Is there any way -- possibly something obvious I've
> missed -- to apply the markdown filter to xmlrpc posts automatically?
> (I've set markdown with smartypants as the default from the admin
> interface, and that works fine from markdown posted from there;
> similarly html from textmate seems to work OK...)
>
> Alternatively, if there is no easy way, does anybody have pointers/
> advice to the appropriate code to start work on a work-around/
> solution? (presumably somewhere in the meta_weblog_service.api?)
>
> Thanks for any time and advice...
>
> allbests,



Not a stupid question at all!

I had to find this out the hard way.

What you want is to add the line:

Format: Markdown

Into your headers.  The easiest way to make this happen by default is to run
TextMate and choose File -> New From Template -> Edit Templates from the
menu, click on the arrow next to the Blogging -> Blog Post (Markdown)
template, then double click on the untitled.blog.markdown document you'll
see there.

Now, just add the Format: Markdown line right after the Title: header.

That's it, you're in business.  Any new Blogging Markdown posts you create
will have the header like and will make typo DWIM.

If this requirement is documented anywhere, I couldn't find it, and I'd love
to be pointed at it if it exists :)

-Chris

-- 
Chris Patti --- Y!: feoh -- AIM: chrisfeohpatti --- E-Mail:
cpatti at gmail.com
"The greatest dangers to liberty lurk in insidious encroachment by men of
  zeal,well-meaning but without understanding."-- Justice Louis O. Brandeis
(Olmstead vs. United States)
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://rubyforge.org/pipermail/typo-list/attachments/20070620/6b9354f5/attachment-0001.html 

From imotic at gmail.com  Fri Jun 22 16:45:12 2007
From: imotic at gmail.com (Liam Morley)
Date: Fri, 22 Jun 2007 16:45:12 -0400
Subject: [typo] is it possible to integrate with an existing rails
	application?
Message-ID: <3f4e3f140706221345j1560e050he21c44fdbf6bf50b@mail.gmail.com>

I did some searching in the archives, and found this question unanswered a
few months ago at
http://rubyforge.org/pipermail/typo-list/2007-February/003977.html. I have
an existing rails application, and I'd really like to use typo- is there a
best practice for integrating typo with an existing application?

Thanks very much.
Liam Morley
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://rubyforge.org/pipermail/typo-list/attachments/20070622/c0c2b58e/attachment.html 

From pdcawley at bofh.org.uk  Sat Jun 23 16:00:53 2007
From: pdcawley at bofh.org.uk (Piers Cawley)
Date: Sat, 23 Jun 2007 21:00:53 +0100
Subject: [typo] is it possible to integrate with an existing rails
	application?
In-Reply-To: <3f4e3f140706221345j1560e050he21c44fdbf6bf50b@mail.gmail.com>
References: <3f4e3f140706221345j1560e050he21c44fdbf6bf50b@mail.gmail.com>
Message-ID: <897e96cc0706231300n557fa8b6v18b831c2d5233c05@mail.gmail.com>

On 22/06/07, Liam Morley <imotic at gmail.com> wrote:
> I did some searching in the archives, and found this question unanswered a
> few months ago at
> http://rubyforge.org/pipermail/typo-list/2007-February/003977.html
> . I have an existing rails application, and I'd really like to use typo- is
> there a best practice for integrating typo with an existing application?

Not so far as I know, but we'd be very grateful for any documentation
you care to write for us after you've done it. Try to make sure your
routes don't clash.

From ahodgkin at rowing.org.uk  Sun Jun 24 08:47:47 2007
From: ahodgkin at rowing.org.uk (Andrew Hodgkinson)
Date: Sun, 24 Jun 2007 13:47:47 +0100
Subject: [typo] is it possible to integrate with an existing
	rails	application?
In-Reply-To: <897e96cc0706231300n557fa8b6v18b831c2d5233c05@mail.gmail.com>
References: <3f4e3f140706221345j1560e050he21c44fdbf6bf50b@mail.gmail.com>
	<897e96cc0706231300n557fa8b6v18b831c2d5233c05@mail.gmail.com>
Message-ID: <467E67F3.60208@rowing.org.uk>

Piers Cawley wrote:

> On 22/06/07, Liam Morley <imotic at gmail.com> wrote:
>> [...]
>> I have an existing rails application, and I'd really like to use typo- is
>> there a best practice for integrating typo with an existing application?
> 
> Not so far as I know, but we'd be very grateful for any documentation
> you care to write for us after you've done it. Try to make sure your
> routes don't clash.

I decided it was simplest to run two applications side by side, rather 
than try to produce a hybrid. This requires the ability to run Typo and 
your other Rails application(s) from non-root locations. I wrote up the 
details on the Rails wiki here:

http://wiki.rubyonrails.com/rails/pages/HowToInstallApplicationsInSubdirectories

If you want to keep gems in more than one repository (e.g. to sandbox 
gems required by a specific application), have a look at this:

http://wiki.rubyonrails.com/rails/pages/HowToUseMultipleGemRepositories

There are many ways to achieve tight integration between applications. 
One possible approach is described at the document given below. That's a 
work in progress and already very long, but then, it does try to describe 
the process in a lot of detail:

http://www.riscosopen.org/wiki/documentation/pages/Web+sites+with+many+Rails+applications

The site on which the document is hosted is a real-world example of the 
approach it describes. It shows the integration of Typo, Radiant, Beast, 
Collaboa, I2 and a few other bits and pieces into one consistent site 
under a single domain name. Source code to everything is available from 
the same site.

If you think this method is worth pursuing and have any questions, please 
don't hesitate to ask either on the mailing list if relevant to Typo, by 
private e-mail, or in the forum on the RISC OS Open web site.

-- 
TTFN, Andrew Hodgkinson
Find some electronic music at:     Photos, wallpaper, software and more:
http://pond.org.uk/music.html                        http://pond.org.uk

From cpatti at gmail.com  Wed Jun 27 18:11:06 2007
From: cpatti at gmail.com (Chris Patti)
Date: Wed, 27 Jun 2007 18:11:06 -0400
Subject: [typo] A 'feature'? of the Visual Rich Editor
Message-ID: <7b528f860706271511i5e3a6373jd716840b57bd1e42@mail.gmail.com>

This may be exactly the way it's supposed to work but it confused the crud
out of me so I thought I'd post for the few non ubergeeks in the audience
like myself.

If you turn on the 'Visual Rich Editor' in your settings, but use a client
like TextMate's blogging bundle to compose your posts with Markdown and then
edit them later from the web interface, you will lose.  Hard.  the Visual
Rich editor will interpret your Markdown as plain text, try to add HTML tags
into the budy of your article and generally mark things up as if you were
typing them in from scratch, resulting in a big old mess :)

The moral of this story is: If you use external clients and Markdown (or
ostensibly any other text filter) turn off the Visual Rich Editor.

-Chris


-- 
Chris Patti --- Y!: feoh -- AIM: chrisfeohpatti --- E-Mail:
cpatti at gmail.com
"The greatest dangers to liberty lurk in insidious encroachment by men of
  zeal,well-meaning but without understanding."-- Justice Louis O. Brandeis
(Olmstead vs. United States)
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://rubyforge.org/pipermail/typo-list/attachments/20070627/9467c383/attachment.html 

From eamonford at mac.com  Thu Jun 28 15:27:57 2007
From: eamonford at mac.com (Eamon Ford)
Date: Thu, 28 Jun 2007 12:27:57 -0700
Subject: [typo] Cache-flushing slowing down Typo
Message-ID: <4BBF4258-6DCB-4E49-A964-5198B8941386@mac.com>

Hi everybody,
I'm running Typo on a 500MHz G4 PowerBook, and whenever I post a new  
entry or comment, Typo loads extreeeeemly slowly. Someone told me  
that this is because of the cache-flushing mechanism, which uses a  
lot of resources. Now, I know 500MHz is a very slow processor, but it  
seems like before I upgraded from 4.0.3 to 4.1.1, everything was  
working fine. Did something change in 4.1.1 having to do with cache- 
flushing? And if so, does anyone have any idea when it might be fixed?

Thanks.

From pdcawley at bofh.org.uk  Thu Jun 28 15:56:15 2007
From: pdcawley at bofh.org.uk (Piers Cawley)
Date: Thu, 28 Jun 2007 20:56:15 +0100
Subject: [typo] Cache-flushing slowing down Typo
In-Reply-To: <4BBF4258-6DCB-4E49-A964-5198B8941386@mac.com>
References: <4BBF4258-6DCB-4E49-A964-5198B8941386@mac.com>
Message-ID: <897e96cc0706281256j142e07ack12263263e948cd20@mail.gmail.com>

On 28/06/07, Eamon Ford <eamonford at mac.com> wrote:
> Hi everybody,
> I'm running Typo on a 500MHz G4 PowerBook, and whenever I post a new
> entry or comment, Typo loads extreeeeemly slowly. Someone told me
> that this is because of the cache-flushing mechanism, which uses a
> lot of resources. Now, I know 500MHz is a very slow processor, but it
> seems like before I upgraded from 4.0.3 to 4.1.1, everything was
> working fine. Did something change in 4.1.1 having to do with cache-
> flushing? And if so, does anyone have any idea when it might be fixed?

Have you tried the edge? My blog used to suffer badly when the cache
had flushed, but I've noticed improvements over the past few
revisions. Also, what sidebars are you using? RSS based sidebars need
to wait for a response from their feeds, and ruby being ruby, we're
not doing those requests asynchronously.

From eamonford at mac.com  Thu Jun 28 17:10:43 2007
From: eamonford at mac.com (Eamon Ford)
Date: Thu, 28 Jun 2007 14:10:43 -0700
Subject: [typo] Cache-flushing slowing down Typo
In-Reply-To: <897e96cc0706281256j142e07ack12263263e948cd20@mail.gmail.com>
References: <4BBF4258-6DCB-4E49-A964-5198B8941386@mac.com>
	<897e96cc0706281256j142e07ack12263263e948cd20@mail.gmail.com>
Message-ID: <0E1E838B-7151-4E01-9C35-D77D1E09DA98@mac.com>

Argh... I downloaded the latest trunk, but when I run "typo start" it  
gives me this:

  ** warning: web-server  unknown.  Use 'web-server=external' to  
disable.
/usr/local/lib/ruby/gems/1.8/gems/rails-app-installer-0.2.0/lib/rails- 
installer.rb:243:in `start': undefined method `start' for  
nil:NilClass (NoMethodError)
         from /usr/local/lib/ruby/gems/1.8/gems/rails-app- 
installer-0.2.0/lib/rails-installer/commands.rb:135:in `command'
         from /usr/local/lib/ruby/gems/1.8/gems/rails-app- 
installer-0.2.0/lib/rails-installer.rb:646:in `execute_command'
         from /usr/local/lib/ruby/gems/1.8/gems/typo-4.1.1/bin/typo:38
         from /usr/local/bin/typo:16:in `load'
         from /usr/local/bin/typo:16

Is this an easy fix? Sorry, I'm kind of new to Typo and Rails so I  
don't really know what's going on.


As for the sidebars, I made sure I'm not using any that are RSS-based.


On Jun 28, 2007, at 12:56 PM, Piers Cawley wrote:

> On 28/06/07, Eamon Ford <eamonford at mac.com> wrote:
>> Hi everybody,
>> I'm running Typo on a 500MHz G4 PowerBook, and whenever I post a new
>> entry or comment, Typo loads extreeeeemly slowly. Someone told me
>> that this is because of the cache-flushing mechanism, which uses a
>> lot of resources. Now, I know 500MHz is a very slow processor, but it
>> seems like before I upgraded from 4.0.3 to 4.1.1, everything was
>> working fine. Did something change in 4.1.1 having to do with cache-
>> flushing? And if so, does anyone have any idea when it might be  
>> fixed?
>
> Have you tried the edge? My blog used to suffer badly when the cache
> had flushed, but I've noticed improvements over the past few
> revisions. Also, what sidebars are you using? RSS based sidebars need
> to wait for a response from their feeds, and ruby being ruby, we're
> not doing those requests asynchronously.
> _______________________________________________
> Typo-list mailing list
> Typo-list at rubyforge.org
> http://rubyforge.org/mailman/listinfo/typo-list


From timocratic at gmail.com  Fri Jun 29 18:03:28 2007
From: timocratic at gmail.com (Tim Connor)
Date: Fri, 29 Jun 2007 15:03:28 -0700
Subject: [typo] tmcode issue status
Message-ID: <5906dd440706291503r18dc6990va4feaea28cf02ec8@mail.gmail.com>

Did the issues with tmcode not working consistently, from earlier in the
year, ever get resolved?  I had go through and convert them all back to
pre/code blocks, but I'd like to convert them back to get the syntax
coloring working again, at some point.
Thanks,
Tim
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://rubyforge.org/pipermail/typo-list/attachments/20070629/ed0f6141/attachment.html